@article{Cong2021,

title = {Dental long axes using digital dental models compared to cone-beam computed tomography.},

author = {A Cong and C Massaro and J Bianchi and ACDO Ruellas and et al},

url = {https://onlinelibrary.wiley.com/doi/10.1111/ocr.12489},

doi = {10.1111/ocr.12489},

year  = {2021},

date = {2021-05-09},

urldate = {2021-05-09},

journal = {Orthod Cranifac Res},

abstract = {Standard methods of evaluating tooth long axes are not comparable (digital dental models [DDMs], panoramic and cephalometric radiographs) or expose patients to more radiation (cone-beam computed tomography [CBCT]). This study aimed to compare angular changes in tooth long axes using DDMs vs using CBCTs. },

keywords = {AAOF, adult, clear aligners, Cranial base, hyperdivergent, Mandibular fixed retainer, Posttreatment, retrospective, teaching},

pubstate = {published},

tppubtype = {article}

}

@article{Currie2017b,

title = {Posterior cranial base natural growth and development: A systematic review. },

author = {K Currie and D Sawchuk and H Saltaji and H Oh and C Flores-Mir and M Lagravere-Vich},

url = {https://pubmed.ncbi.nlm.nih.gov/28737426/},

doi = {10.2319/032717-218.1},

year  = {2017},

date = {2017-11-00},

journal = {Angle Orthodontist},

volume = {87},

number = {6},

pages = {897-910},

abstract = {To provide a synthesis of the published studies evaluating the natural growth and development of the human posterior cranial base (S-Ba).},

keywords = {AAOF, adult, Cranial base, extraction, fixed appliances, Growth, mandibular asymmetry, Mandibular fixed retainer, Posttreatment, pressure tension, research, retrospective, vertical control, x-ray},

pubstate = {published},

tppubtype = {article}

}

@article{Hwang2017,

title = {Surgery-first approach in correcting skeletal Class III malocclusion with mandibular asymmetry},

author = {Hyeon-Shik Hwang and Min-Hee Oh and Hee-Kyun Oh and Heesoo Oh},

url = {http://162.214.24.32/~crilorg/wp-content/uploads/2018/11/Surgery-first-approach-in-correctingskeletal-CLass-III_AJODO-2017.pdf},

doi = {10.1016/j.ajodo.2014.10.040},

year  = {2017},

date = {2017-08-01},

urldate = {2017-08-01},

journal = {American Journal of Orthodontics and Dentofacial Orthopedics},

volume = {152},

number = {2},

pages = {255-267},

abstract = {This case report describes a surgical orthodontic case that used the recently introduced surgery-first approach to correct a severe skeletal Class III malocclusion. A 19-year-old woman presented with severe mandibular prognathism and facial asymmetry; she had been waiting for growth completion in order to pursue surgical correction. After prediction of the postsurgical tooth movement and surgical simulation, 2-jaw surgery that included maxillary advancement and differential mandibular setback was performed using a surgery-first approach. Immediate facial improvement was achieved and postsurgical orthodontic treatment was efficiently carried out. The total treatment time was 16 months. The patient's facial appearance improved significantly and a stable surgical orthodontic outcome was obtained. (Am J Orthod Dentofacial Orthop 2017;152:255-67) },

keywords = {AAOF, adult, Class III, Cranial base, Discrepency Index, hyperdivergent, mandibular asymmetry, Mandibular fixed retainer, Mandibular remodeling, mapping, open bite, orthodontic, surgery-first},

pubstate = {published},

tppubtype = {article}

}

@article{Hwang2017b,

title = {Surgery-first approach in correcting skeletal Class III malocclusion with mandibular asymmetry. },

author = {HS Hwang and MH Oh and HK Oh},

url = {https://pubmed.ncbi.nlm.nih.gov/28760288/},

doi = {10.1016/j.ajodo.2014.10.040},

year  = {2017},

date = {2017-08-00},

journal = {Am J Orthod Dentofacial Orthop},

volume = {152},

number = {2},

pages = {255-267},

abstract = {This case report describes a surgical orthodontic case that used the recently introduced surgery-first approach to correct a severe skeletal Class III malocclusion. A 19-year-old woman presented with severe mandibular prognathism and facial asymmetry; she had been waiting for growth completion in order to pursue surgical correction. After prediction of the postsurgical tooth movement and surgical simulation, 2-jaw surgery that included maxillary advancement and differential mandibular setback was performed using a surgery-first approach. Immediate facial improvement was achieved and postsurgical orthodontic treatment was efficiently carried out. The total treatment time was 16 months. The patient's facial appearance improved significantly and a stable surgical orthodontic outcome was obtained.},

keywords = {AAOF, adult, anterior openbite, clinical orthodontist, Cone-beam computed tomography, Cranial base, Discrepency Index, fixed appliances, malocclusion severity, Mandibular fixed retainer, Peer Assessment Rating Index, Posttreatment, pressure tension, retrospective},

pubstate = {published},

tppubtype = {article}

}

@article{Xu2010,

title = {A Randomized Clinical Trial (RCT) Comparing Maxillary Molar Anchorage Loss Using Two Retraction Techniques.},

author = {T-M Xu and X Zhang and HS Oh and R Boyd and El Korn and S Baumrind},

url = {https://pubmed.ncbi.nlm.nih.gov/21055588/},

doi = {10.1016/j.ajodo.2009.12.027},

year  = {2010},

date = {2010-11-00},

journal = {American Journal of Orthodontics & Dentofacial Orthopedics},

volume = {138},

number = {5},

pages = {544-5},

abstract = {The objective of this pilot randomized clinical trial was to investigate the relative effectiveness of anchorage conservation of en-masse and 2-step retraction techniques during maximum anchorage treatment in patients with Angle Class I and Class II malocclusions.},

keywords = {adult, clinical orthodontist, Cone-beam computed tomography, Cranial base, hyperdivergent, Mandibular fixed retainer, open bite, orthodontic, Peer Assessment Rating Index, retrospective},

pubstate = {published},

tppubtype = {article}

}

@article{Lee2001,

title = {Prenatal development of the human mandible. },

author = {Lee SK and Kim YS and Oh HS and Yang KH and Kim EC and Chi JG},

url = {https://pubmed.ncbi.nlm.nih.gov/11455541/},

doi = {10.1002/ar.1110},

year  = {2001},

date = {2001-07-01},

journal = {The Anatomical Record},

volume = {263},

number = {3},

pages = {314-25},

abstract = {In an effort to better understand the interrelationship of the growth and development pattern of the mandible and condyle, a sequential growth pattern of human mandibles in 38 embryos and 111 fetuses were examined by serial histological sections and soft X-ray views. The basic growth pattern of the mandibular body and condyle appeared in week 7 of fertilization. Histologically, the embryonal mandible originated from primary intramembranous ossification in the fibrous mesenchymal tissue around the Meckel cartilage. From this initial ossification, the ramifying trabecular bones developed forward, backward and upward, to form the symphysis, mandibular body, and coronoid process, respectively. We named this initial ossification site of embryonal mandible as the mandibular primary growth center (MdPGC). During week 8 of fertilization, the trabecular bone of the mandibular body grew rapidly to form muscular attachments to the masseter, temporalis, and pterygoid muscles. The mandible was then rapidly separated from the Meckel cartilage and formed a condyle blastema at the posterior end of linear mandibular trabeculae. The condyle blastema, attached to the upper part of pterygoid muscle, grew backward and upward and concurrent endochondral ossification resulted in the formation of the condyle. From week 14 of fertilization, the growth of conical structure of condyle became apparent on histological and radiological examinations. The mandibular body showed a conspicuous radiating trabecular growth pattern centered at the MdPGC, located around the apical area of deciduous first molar. The condyle growth showed characteristic conical structure and abundant hematopoietic tissue in the marrow. The growth of the proximal end of condyle was also approximated to the MdPGC on radiograms. Taken together, we hypothesized that the MdPGC has an important morphogenetic affect for the development of the human mandible, providing a growth center for the trabecular bone of mandibular body and also indicating the initial growth of endochondral ossification of the condyle.},

keywords = {adult, anterior openbite, clear aligners, clinical orthodontist, Cone-beam computed tomography, craniofacial, Discrepency Index, hyperdivergent, Mandibular fixed retainer, Posttreatment, pressure tension},

pubstate = {published},

tppubtype = {article}

}

@article{Garnett,

title = {Cephalometric comparison of anterior openbite tx using clear aligners and fixed appliances},

author = {Bella Shen Garnett and Kimberly Mahood and Mai Nguyen and Aliaa Al-Khateeb and Siqi Liu and Robert Boyd and Heesoo Oh},

doi = {10.2319/010418-4.1},

journal = {Angle Orthodontist},

abstract = {Objectives: To compare fixed appliances and clear aligner therapy in correcting anterior open biteand in controlling the vertical dimension in adult patients with hyperdivergent skeletal patterns.

Materials and Methods: In this retrospective study, two treatment groups of adult (_18 years old)hyperdivergent patients (mandibular plane angles of _388) with anterior open bites were included:17 fixed appliance patients and 36 clear aligner patients. Thirteen cephalometric measurementsrepresenting the vertical dimension were reported for each group. A two-sample t-test was used toassess differences in changes in mandibular plane angle and overbite between the two treatmentgroups.

Results: There were no statistical differences found in the magnitude of overbite correction and thechanges in any of the cephalometric measurements for vertical control. The clear aligner groupshowed a slightly greater amount of lower incisor extrusion (P . .009). The main mechanism ofopen bite correction was similar between the two treatment groups and was accomplished throughretroclination of the upper and lower incisors while maintaining the vertical position of the upper andlower molars.

Conclusions: Cephalometric comparison of anterior open bite correction and changes in themandibular plane angle associated with use of clear aligners and fixed appliances did notdemonstrate statistically significant differences in adult hyperdivergent patients. (Angle Orthod.0000;00:000–000.)},

keywords = {adult, anterior openbite, clear aligners, fixed appliances, hyperdivergent, open bite, vertical control},

pubstate = {forthcoming},

tppubtype = {article}

}

@article{Oh2019b,

title = {Comparison of traditional RPE with two types of micro-implant assisted RPE: CBCT study.},

author = {H Oh and Park J and M Lagravere-Vich },

url = {https://www.sciencedirect.com/science/article/pii/S1073874619300076},

doi = {10.1053/j.sodo.2019.02.007},

journal = {Semin Orthod},

volume = {25},

number = {1},

pages = {60-68},

abstract = {Recently, various types of the Micro-implant Assisted RPE (MARPE) were introduced to obtain greater skeletal expansion and to minimize dental effects. In the present study, we evaluated skeletal and dental effects immediately after the completion of expansion using three different types of expanders— a traditional tooth-anchored maxillary expander (TAME) and two different types of MARPE, bone-anchored maxillary expander (BAME) and tooth-bone-anchored expander (MSE) using CBCT in adolescents. Overall, the MSE group showed much greater skeletal changes than the TAME and BAME groups, especially, at the nasal floor, maxillary base, and palatal suture. About 72–78% of suture opening was at PNS, which indicates slightly more opening anteriorly than posteriorly; however, it was relatively parallel in nature than anticipated. In all three groups, the greatest transverse changes with expansion occurred at the molar crowns and the 2nd greatest changes at the palatal suture opening at ANS. It is suggested that MSE can be a great alternative method in correcting maxillary skeletal transverse deficiency.},

keywords = {AAOF, adult, anterior openbite, Cranial base, extraction, Growth, Posttreatment, pressure tension, retrospective, technique, x-ray},

pubstate = {published},

tppubtype = {article}

}

@article{Bussolaro2019,

title = {Pharyngeal dimensional changes in class II malocclusion treatment when using Forsus® or intermaxillary elastics - An exploratory study.},

author = {Thereza-Bussolaro C and Oh HS and Lagravere M and Flores-Mir C },

url = {https://pubmed.ncbi.nlm.nih.gov/31492602/},

doi = {10.1016/j.ortho.2019.08.023},

journal = {Int Orthod},

volume = {17},

number = {4},

pages = {667-677},

abstract = {Pharyngeal airway obstruction can facilitate some forms of sleep disorder breathing (SDB) in susceptible children, especially in those having class II malocclusion. Changes in the anatomic areas surrounding the pharyngeal region during orthodontic treatment could hypothetically impact the pharyngeal airway dimensions. Management of a class II malocclusion on a growing individual with either intermaxillary elastics or different removable or fixed class II appliance designs have been proposed over the last century. The objective of this retrospective exploratory cohort study is to investigate to what extent the class II malocclusion treatment with either intermaxillary elastics (IME) or Forsus® fatigue resistance device (FFRD) leads to changes in oropharyngeal airway dimensions.},

keywords = {AAOF, adult, clear aligners, Cone-beam computed tomography, Cranial base, craniofacial, Mandibular fixed retainer, Mandibular remodeling, Peer Assessment Rating Index, pressure tension, research, teaching, technique, vertical control},

pubstate = {published},

tppubtype = {article}

}